QY35K Truck Crane
QY35K Truck Crane outline profile and hydraulic system won 6 China state patents.
4-section boom of all-round octagonal boom profile, low center of gravity, good stability.
Single cylinder for front support elevation, and no side bending for boom.
Main and auxiliary winches are independent each other, work not only individually but also simultaneously.
Full-width driver's cab with wide vision is convenient for operation.
Swing system with free-sliding function automatically align to load. Pinion offset makes meshing clearance easy to adjust.
New materials are used to minimize the vehicle total weight and maximize the whole vehicle performances. Main performances are in the leading position in the industry.
Hydraulic pilot control system realizes all operations precisely with softly pushing the two joysticks on armrest (mechanical operation system for option).
Hydraulic valve block is integrated modular designed, little pressure loss and high work efficiency.
Counterbalance valve designed with international technology, oil filter, anti-cavitations device and plug in hydraulic circuit make operation more reliable.
Well-equipped safety devices such as automatic load moment limiter, hoist limit switch, and wire rope over-release cut-out device make operation more safe.
Engine, air conditioner for superstructure and carrier and hydraulic device are available for option.
Main Technical Specifications
Technical Data for Lifting Operation
Classificatory
Item
Unit
Parameter
Outline dimension
Overall length
mm
12610
Overall width
mm
2500
Overall height
mm
3280
Wheel base
Axle 1, Axle 2
mm
1520
Axle 2, Axle 3
mm
3815
Axle 3, Axle 4
mm
1350
Mass
Total mass in travel state
kg
32300
Axle load
Front axle
kg
11150
Rear axle
kg
21120
Travel performance
Travel speed
Max. travel speed
km/h
72
Min. stable travel speed
km/h
3
Turning diameter
Min. turning diameter
m
22
Min. turning diameter at boom tip
m
25
Min. ground clearance
mm
260
Approach angle
()
16
Departure angle
()
15
Braking distance (at 30km/h with full load)
m
10
Max. grade-ability
30
Fuel consumption for 100km
L
36
Power
Model
WD615.67A
Engine rated output
kW/(r/min.)
206/2200
Engine rated torque
N.m/(r/min.)
1100/1400
Engine rated speed
rpm.
2200
Main Technical Data for Lifting Operation
Classificatory
Item
Unit
Parameter
Lifting performance
Max. total rated lifting capacity
t
35
Min. rated working radius
m
3
Turning radius at turntable tail
m
3.055
Max. load moment
Base boom
kN.m
1166
Fully extended boom
kN.m
645
Fully extended boom + Jib
kN.m
475
Outrigger span
Longitudinal
m
5.35
Lateral
m
6.0
Lifting height
Base boom
m
10.5
Fully extended boom
m
33
Fully extended boom + Jib
m
48
Working speed
Boom raising time
s
80
Boom full extension time
s
100
Max. swing speed
r/min
2.0
Hoist speed
Main winch
Full load
m/min
85
No load
m/min
100
Aux. winch
Full load
m/min
80
No load
m/min
100
Noise limit
Crane exterior noise
dB (A)
118
At seated position
dB (A)
90
Note: All specifications on our web-site are subject to technical modifications without notice.
QY35K Truck Crane