QAY25 All Terrain Crane adopts 4-section box type powered telescoping, with all-round hexagonal boom profile, made of high-tensile structural steel, with longitudinal reinforcement for improving partial stability of boom lower plate, better lateral rigidity for boom. 5 sheaves at boom head, the 2nd, 3rd sections and the top one synchronously telescope, telescoping system contains double-action cylinder and wire ropes, and with holding valve fitted in the cylinder. 2-axle chassis with environment engine, all axle drive, all wheel steering and crab walk possible, equipped with advanced hydro-pneumatic suspension and off-road tires, suitable for variable complicated ground conditions. The vehicle can travel on various rough road, operate 360full circle, and also on mid-extended outrigger or on tires, and travel with a suspended load.
QAY25 All Terrain Crane Main Specifications
1Technical Data in Travel State
|
Classification |
Item |
Unit |
Parameter |
|
Outline dimension |
Overall length |
mm |
10700 |
|
Overall width |
mm |
2500 |
|
Overall height |
mm |
3550 |
|
Wheel base |
mm |
4000 |
|
Track |
Front wheels |
mm |
2110 |
|
Rear wheels |
mm |
2110 |
|
Front overhang |
mm |
2930 |
|
Rear overhang |
mm |
1540 |
|
Mass |
Total mass in travel state |
kg |
25200 |
|
Axle load |
Front axle |
kg |
12600 |
|
Rear axle |
kg |
12600 |
|
Power |
Engine model |
|
D6114ZLQ2B |
|
Engine max. power |
kW/(r/min) |
184/(2200r/min) |
|
Engine max. torque |
Nm/(r/min) |
958/(1400r/min) |
|
Engine stable idle speed |
r/min |
650700 |
|
Travel performance |
Travel speed |
Max. travel speed |
km/h |
70 |
|
Min. stable travel speed |
km/h |
2 |
|
Turning diameter |
Min. turning diameter |
Front axle steering |
m |
20 |
|
All axles steering |
m |
14 |
|
turning dia. at boom tip |
Front axle steering |
m |
24.9 |
|
All axles steering |
m |
18.1 |
|
Min. Ground clearance |
mm |
360 |
|
Approach angle |
|
21 |
|
Departure angle |
|
20 |
|
Braking distance (at 30KM/h with full load) |
m |
10 |
|
Max. Grade-ability |
|
58% |
|
Crane exterior noise at acceleration |
dBA |
88 |
|
Fuel consumption for 100km |
L |
40 |
|
Others |
Chassis model |
|
XZA25 |
|
Tyre spec. |
|
14.00-25 |
|
No. of tyre (excluding spare tyre) |
|
4 |
|
Tyre pressure |
MPa |
1.0 |
2Technical Data for Lifting Operation
|
Classificatory |
Item |
Unit |
Parameter |
|
Main
performance |
Max. total rated lifting capacity |
t |
25 |
|
Min. rated working radius |
m |
3 |
|
Turning radius at turntable tail |
m |
3.32 |
|
Max. load moment |
Base boom |
kNm |
948
(21.5t4.5m) |
|
Fully extended boom |
kNm |
416
(2.5t7m) |
|
Fully extended boom + jib |
kNm |
310
(2.15t14.7m) |
|
Outrigger span |
Longitudinal |
m |
6.325 |
|
Lateral |
m |
6.2 |
|
Hoist height |
Base boom |
m |
8.8 |
|
Fully extended boom |
m |
28.2 |
|
Fully extended boom + jib |
m |
36.6 |
|
Boom length |
Base boom |
m |
8.9 |
|
Fully extended boom |
m |
28 |
|
Fully extended boom + jib |
m |
28+8.15 |
|
Jib offset |
|
01530 |
|
Working speed |
Boom raising time |
s |
30 |
|
Boom full extension time |
s |
40 |
|
Max. swing speed |
r/min |
2.5 |
|
Outrigger telescoping time |
Outrigger beam |
Extension at one time |
s |
25 |
|
Retraction at one time |
s |
18 |
|
Outrigger jack |
Extension at one time |
s |
25 |
|
Retraction at one time |
s |
18 |
|
Hoists peed (single rope) |
Main winch |
m/min |
140 |
|
Aux. winch |
m/min |
140 |
|
Noise limit |
Crane exterior noise |
dB (A) |
118 |
|
At seated position |
dB (A) |
90 |
